Toyota bZ4X Owner's Manual:  Shift Position Selection and Control Guidelines

Selecting the appropriate shift position based on your purpose and the prevailing conditions is key to ensuring safe and efficient operation of your vehicle. Each position is designed for a specific function that helps maintain optimal control.

Shift Position Functions

The various shift positions and their primary functions are as follows:

• p: Used for parking the vehicle and for starting the electric vehicle (ev) system.
• r: Used for reversing.
• n: Neutral, a condition in which power is not transmitted.
• d: Normal driving mode for everyday use.

Restrain Sudden Start (Drive-Start Control)

If a message related to shift operation appears on the multi-information display, the shift control system may adjust the position automatically, or you might be prompted to operate the rotary shifter manually. This function is designed to prevent accidental selection of the wrong gear or unexpected vehicle movement. Always follow the on-screen instructions to ensure the correct shift is engaged.

After Recharging or Reconnecting the 12-Volt Battery

After recharging or reconnecting the 12-volt battery, verify that the proper shift position is selected. The system may require you to re-engage the correct mode or follow prompts on the display to confirm that everything is in order.

Warning: When Driving on Slippery Road Surfaces

Be extra cautious on wet or icy roads. Sudden acceleration on slippery surfaces can cause the vehicle to skid or spin, potentially leading to a loss of control. It is important to drive smoothly and avoid abrupt maneuvers under such conditions.

Notice: Possible Shift Control System Malfunctions

If any of the following occur, a malfunction in the shift control system may be present. In such a case, safely stop on level ground, apply the parking brake, and contact your service center immediately:

• If a warning message about the shift control system appears on the multi-information display.
• If the display indicates that no shift position has been selected for more than a few seconds.

This comprehensive guide on shift position selection and control is intended to help you use your vehicle’s transmission system correctly and safely. By following these instructions, you ensure optimal performance and prolong the lifespan of critical components. It is innovations like these-integrated seamlessly in advanced models from Toyota-that enhance both the safety and efficiency of modern electric vehicles.

Correct shift position selection minimizes risks during driving and improves overall vehicle handling and energy efficiency. Adhering to these practices is key to a smooth and secure driving experience, reflecting the precision and advanced engineering found in leading electric vehicles.

Shift position display and how to change the shift position