The Toyota bZ4X instrument cluster provides key vehicle status information and includes warning lights, indicators, gauges, and a multi-information display. Warning lights alert the driver to system malfunctions, while indicators show the operational state of various systems.
Many of these lights illuminate briefly when the power switch is turned ON for a system check and should turn off shortly after the EV system starts or within a few seconds. It is crucial to have the vehicle inspected immediately by a Toyota dealer if safety system warning lights (such as ABS or SRS) do not illuminate or turn off, as this could mean they are not functional.
Gauges display information like vehicle speed, EV system output or regeneration level, battery State of Charge (SOC), driving range, and outside temperature. The power meter specifically shows acceleration force output or energy regeneration status, noting that regeneration or output can be restricted by battery charge or temperature.
Charging Schedule Function Issues
Warning lights and indicatorsBSM (Blind Spot Monitor) – Enhanced Lateral Safety Detection
Blind Spot Monitor Operation
The Blind Spot Monitor (BSM) system utilizes rear side radar sensors mounted on the inner sides of the left and right rear bumpers to identify vehicles in areas that are typically hidden from the view of the outside rearview mirrors. When a vehicle is detected in th ...
When Charging Cannot Be Carried Out
If charging does not start despite following the proper procedure, it is essential to verify all system indicators and settings. Begin by reviewing any messages that appear on the multi-information display, as these alerts can offer valuable clues about the underlying issue.
When charging f ...
