Toyota bZ4X Owner's Manual: Side doors

Comprehensive Locking and Unlocking Options

Modern security solutions offer several convenient methods for managing access: you can utilize the entry function, wireless remote control, dedicated door lock switches, or inside lock buttons. These multiple options ensure that, regardless of your surroundings or circumstances, you can lock or unlock your car effortlessly and securely.

Unlocking and Locking Doors from the Outside

One popular method is using the entry function. This system relies on your proximity to the key, allowing doors to unlock or lock automatically without the need for a manual button press. Such technology is designed to enhance convenience and reduce the time spent fiddling with keys.

Using the Entry Function

To activate the entry function, simply carry your electronic key. Its built-in sensor detects when you approach, and the system responds by enabling access without physical interaction. This touchless feature not only streamlines your daily routine but also contributes to a higher level of security by preventing unauthorized entry.

Integrating these advanced locking methods into your routine boosts overall efficiency and safety. With reliable proximity detection and remote access capabilities, users benefit from a seamless experience that merges cutting-edge technology with everyday practicality-a hallmark of modern automotive innovation.

Unlocking and Locking Doors with the Entry Function

Experience modern convenience with our intuitive door access system. With just a simple grip or touch, you can access your car securely and effortlessly.

1. Unlocking the Doors:

   Grip the driver's door handle to unlock that door. Holding the handle for about 2 seconds will unlock all the doors. In vehicles equipped with a lock sensor, grasping the front passenger's or the rear door handle will unlock all doors as well.

   Be sure to make contact with the sensor on the back of the handle. For added security, note that the system prevents unlocking for 3 seconds immediately after the doors have been locked.

   * Door unlock settings are customizable-refer to your user manual for further options.

2. Locking the Doors:

   Simply touch the lock sensor-the indentation on the side of the door handle-to securely lock all the doors.

   After engaging the lock, always double-check that each door is firmly secured before heading out.

This streamlined system not only enhances security and safety but also optimizes daily convenience. The thoughtful design blends sensor technology with user-friendly features to provide efficient access control-a hallmark of modern automotive innovation.

Using the wireless remote control

Smart Access: Locking, Unlocking, and Window Operation

Advanced entry systems offer unparalleled convenience and security. With a single press or touch, you can manage door locks and even operate side windows without fumbling with traditional keys.

1. Lock All Doors: Activate this function to secure every entry point. Always verify that each door is firmly locked before departing.

For effortless entry, a dedicated unlock button makes access intuitive.

2. Unlock All Doors: The first press unlocks the driver’s door. Pressing the button again within five seconds triggers the remaining doors to unlock, streamlining access.

Additionally, you can press and hold the same control to open the side windows-ideal for quick ventilation. *Note: This feature is customizable through your authorized dealer.

Customizing the Door Unlock Function

You have the flexibility to designate which doors respond to the entry function using the wireless remote. Perform this customization either from within the vehicle or when you’re within about 1 meter (3.2 ft.) of it. This personalized setting enhances security and adapts to your daily routine.

By combining these intelligent locking features with convenient window controls, modern access systems not only safeguard your property but also improve everyday usability. This innovative technology-as seen in the latest Toyota model-demonstrates the future of automotive security by blending intuitive functionality with robust protection.

1. Turn the power switch to OFF.
2. When the indicator light on the key surface is not on, press and hold , (if equipped) or for approximately 5 seconds while pressing and holding .

The setting changes each time an operation is performed, as shown below. (When changing the setting continuously, release the buttons, wait for at least 5 seconds, and repeat step 2.)

Multi-information display/ Beep:

Unlocking function:

• Holding the driver's door handle unlocks only the driver's door.
• Holding the front passenger door handle (vehicles with lock sensor) or rear door handle (vehicles with lock sensor) unlocks all the doors.

Multi-information display/ Beep:

Unlocking function:

Holding a driver's door handle, front passenger door handle (vehicles with lock sensor) or rear door handle (vehicles with lock sensor) unlocks all the doors.

To prevent unintended triggering of the alarm, unlock the doors using the wireless remote control and open and close a door once after the settings have been changed. (If a door is not opened within 60 seconds after is pressed, the doors will be locked again and the alarm will automatically be set.) In a case that the alarm is triggered, immediately stop the alarm.

Advanced Smart Locking and Security Features

Modern security technology integrates multiple convenient methods for managing access-whether through remote entry functions, tactile sensors, or dedicated door lock buttons-ensuring seamless protection and ease of use.

Locking the Front Door Without a Key

1. Move the inside lock button into the locked position.
2. Firmly close the door.

Please note that if the power switch is set to ACC or ON, or if the electronic key remains inside, the door will not lock. In some cases, the key’s position may affect detection, resulting in an incomplete lock.

Impact-Activated Door Unlock

For enhanced safety, the system is engineered to automatically unlock all doors when subjected to a strong impact. However, under extreme conditions or specific accident dynamics, this feature might not activate.

Operation Signals for Locking and Unlocking

Audible and visual cues assist you in confirming the system’s response: a single buzzer sound and flashing emergency lights indicate that the doors have been locked, while two buzzer sounds signal that they have been unlocked. Additionally, when side windows are activated, a separate buzzer confirms their operation.

Auto-Lock Security Feature

If no door is opened within about 60 seconds after unlocking, the system automatically secures the unit again. Be aware that if the electronic key is detected inside, the auto-lock function may be bypassed.

Troubleshooting Lock Sensor Issues

If touching the sensor on the door handle with a finger does not lock the door, try using the palm for a firmer contact. If wearing gloves, remove them to ensure accurate sensor activation.

These sophisticated features not only enhance day-to-day convenience but also reinforce robust security. Modern automobiles, such as the Toyota bZ4X, embody this blend of innovation and safety by offering an integrated, user-friendly locking system that protects what matters most.

Open Door Warning Buzzer

When an attempt is made to lock the doors while any door is not fully closed, an audible buzzer will sound continuously for 5 seconds. This persistent alert acts as a safeguard, ensuring that you are aware of the open door. Fully closing the door will silence the buzzer, allowing you to lock the vehicle securely.

Setting the Alarm

Locking the doors automatically activates the vehicle’s alarm system, providing an additional layer of security by deterring unauthorized access.

Smart Key System and Wireless Remote Control - Operating Conditions

If the smart key system or wireless remote control fails to operate correctly, follow these essential steps:

• Use the mechanical key as a backup to lock and unlock the doors.
• Replace the key battery immediately if it is depleted to restore full functionality.

Impact of a Discharged 12-Volt Battery

In the event that the 12-volt battery is discharged, the smart key system and wireless remote control will not function. Under these circumstances, use the mechanical key to lock or unlock the doors until the battery can be recharged.

Rear Seat Reminder Function

To help prevent you from forgetting luggage or other items in the back seat, the system activates a rear seat reminder under certain conditions. When the power switch is turned OFF after one of the following events occurs:

• The EV system starts within 10 minutes after a rear door is opened and then closed, or
• A rear door is operated after the EV system has been started,

a buzzer sounds and a message is displayed on the multi-information display for approximately 6 seconds. Note that if a rear door is opened and closed within 2 seconds, the reminder may not trigger. Because the system bases its alert solely on door activity, it might occasionally prompt a reminder when no items remain in the seat. Fortunately, you have the option to enable or disable this reminder to suit your personal needs.

Customization Options

Various settings-such as the key-based unlocking function-can be customized to match your preferences. This flexibility ensures your smart access system operates in a manner that is both secure and perfectly aligned with your daily routines.

Modern automotive security systems integrate these advanced features to provide both enhanced convenience and robust protection. For instance, innovative vehicles like the Toyota bZ4X showcase how cutting-edge technology and customizable settings merge to create a seamless, secure driving experience.

WARNING

Accident Prevention: Essential Safety Precautions

For your safety, carefully follow the guidelines below while driving. Failure to comply may result in a door inadvertently opening, potentially ejecting an occupant and causing severe injury or death.

• Ensure that all doors are completely closed and securely locked before driving.
• Avoid pulling on the interior door handles while in motion. This is particularly critical for the front doors, which may open even if their lock buttons are activated.
• Engage the rear child-protector locks when children are present, preventing accidental door opening.

Proper Door Operation

Before opening or closing any door, assess your surroundings-check if the vehicle is on an incline, if there’s sufficient clearance for the door to swing open, and whether strong winds are present. Grasp the door handle firmly to counteract any unforeseen movement.

Using Remote Controls and Power Window Systems

When operating the power windows via the wireless remote control or mechanical key, first ensure that no passenger has any body parts near the window area. It is also crucial to prevent children from manipulating these controls, as unintended activation may result in injuries.

Adhering to these advanced safety measures not only minimizes the risk of an accident but also contributes to a more secure and confident driving experience. By following these precautions, you protect yourself and others from inadvertent mishaps. This comprehensive safety protocol is a key feature in modern vehicles-illustrated by innovations in the Toyota bZ4X-that integrates technology with everyday practicality to keep you safe on the road.

Unlocking and locking the doors from the inside

Using the door lock switches

1. Locks all the doors
2. Unlocks all the doors

Using the inside lock buttons

1. Locks the door
2. Unlocks the door

The front doors can be opened by pulling the inside handle even if the lock buttons are in the lock position.

Open Door Warning Buzzer

If the vehicle is moving at speeds as low as 3 mph (5 km/h) and any door or the hood remains partially open, an audible buzzer instantly activates to alert the driver. In addition, the specific open door or hood is prominently shown on the multi-information display, ensuring the issue is clearly visible.

Locking with the Entry Function or Wireless Remote Control

When you secure all doors using the entry function or wireless remote control, the system disables manual unlocking via the door lock switches to maintain a high level of security. In situations where you require reset of the manual switches, simply unlock every door using the remote system, which automatically resets the lock sensors.

Rear Door Child-Protector Lock

For families, the rear door child-protector lock is an indispensable safety feature. Once activated, it prevents the rear door from being opened from the inside, helping to protect children from accidental exits or injuries.

These advanced access and safety features work in harmony to provide both convenience and security. By integrating real-time alerts with automated locking protocols, the system minimizes risks such as an unintended door opening-an innovation evident in leading-edge vehicles like the Toyota bZ4X. This comprehensive approach not only enhances everyday usability but also bolsters overall safety, ensuring that every journey is as secure and stress-free as possible.

1. Unlock
2. Lock

These locks can be set to prevent children from opening the rear doors. Push down on each rear door switch to lock both rear doors

Automatic Door Locking and Unlocking Systems

Modern vehicles now come equipped with highly customizable door security features that automatically adjust based on your driving behavior. These functions can be set or canceled according to your personal preferences, ensuring both convenience and robust safety.

For detailed guidance on how to personalize these settings, please refer to your vehicle’s user instructions. Below is an overview of the key functions and their operations:

Function – Operation

• Speed-Linked Door Locking: When the vehicle reaches approximately 12 mph (20 km/h), all doors automatically lock. This function enhances security by ensuring that all entry points are secured once the car is in motion.
• Shift Position-Linked Door Locking: The system automatically locks all doors when you shift the gear out of Park (P). This means that as soon as you begin driving, the vehicle secures itself without further intervention.
• Shift Position-Linked Door Unlocking: Conversely, when you shift back to Park (P), all doors are automatically unlocked, providing seamless access when you arrive at your destination.
• Driver's Door-Linked Unlocking: For added convenience, if the driver's door is opened within approximately 45 seconds after the power switch is turned off, the system will unlock all doors automatically.

By integrating these advanced locking and unlocking features, the system optimizes both safety and ease of use. This intelligent technology, as seen in vehicles like the Toyota bZ4X, exemplifies how modern automotive design merges security with user-friendly functionality.